Tên sản phẩm: | Motor giảm tốc loại chân đế 7.5KW/10HP |
Giá sản phẩm: | Liên hệ |
Nhà sản xuất: | Dolin |
Tình trạng: | Còn hàng |
Bảo hành: | 18 tháng |
MÔ TẢ CHI TIẾT SẢN PHẨM:
Specifications and Ratings |
|
Category | High Ratio Helical Speed Reducing Motor |
Gear Ratio | 1/3 ~ 1/200 |
Mounting | Horizontal Foot Mount |
Output Shaft (Ø) | 18mm ~ 50mm |
Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization)
SCM4 (Nitrogen Hardening) |
Motor Specification and Rating | |
Design Standard | IEC, CQC, JIS |
Pole | 4P |
Output Power | 0.1KW ~ 7.5KW (1/8 HP ~ 10HP) |
Rated Frequency | 50Hz / 60Hz |
Time Duty | S1 (Continuous Duty) |
Stator Insulation | Class B |
Method of Starting | Full Voltage Direct On Line or Y-Δ Starting |
Environmental Restriction |
|
Place | Indoor. The product should be installed on flat and solid foundation |
Voltage Regulation | 10% |
Frequency Regulation | 5% |
Ambient Temperature | -5°C~40°C |
Attitude | Not exceed 1000 Meters |
Relative Humidity | Less than 85% RH (Non-Condensation) |
Structure |
|
Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) |
Lubrication | Grease NO.0 |
Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. |
Terminal Box | Larger Size Made by Pressed Steel Which can be Set 900 Apart with
Conduit Hole Cable Entrance at Left Side View from The Drive End. |
Lead Terminal | Solderless Lug Teminal |
Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color
(Munsell 7.5G 4/2.) |
Bolt Thread | ISO Metric System |
Cùng Chuyên Mục: