| Tên sản phẩm: | Motor giảm tốc loại mặt bích 7.5KW/10HP |
| Giá sản phẩm: | Liên hệ |
| Nhà sản xuất: | Dolin |
| Tình trạng: | Còn hàng |
| Bảo hành: | 18 tháng |
MÔ TẢ CHI TIẾT SẢN PHẨM:
| Specifications and Ratings/Chi tiết thông số kỹ thuật | |
| Category | High Ratio Helical Speed Reducing Motor |
| Gear Ratio | 1/3 ~ 1/200 |
| Mounting | Vertical Flange Mount |
| Output Shaft (Ø) | 50mm |
| Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization)
SCM4 (Nitrogen Hardening) |
| Motor Specification and Rating | |
| Design Standard | IEC, CQC, JIS |
| Pole | 4P |
| Output Power | 0.1KW ~ 7.5KW (1/8 HP ~ 10HP) |
| Rated Frequency | 50Hz / 60Hz |
| Time Duty | S1 (Continuous Duty) |
| Stator Insulation | Class B |
| Method of Starting | Full Voltage Direct On Line or Y-Δ Starting |
| Environmental Restriction | |
| Place | Indoor. The product should be installed on flat and solid foundation |
| Voltage Regulation | 10% |
| Frequency Regulation | 5% |
| Ambient Temperature | -5°C~40°C |
| Attitude | Not exceed 1000 Meters |
| Relative Humidity | Less than 85% RH (Non-Condensation) |
| Structure | |
| Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) |
| Lubrication | Grease NO.0 |
| Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. |
| Terminal Box | Larger Size Made by Pressed Steel Which can be Set 90o Apart with
Conduit Hole Cable Entrance at Left Side View from The Drive End. |
| Lead Terminal | Solderless Lug Teminal |
| Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color
(Munsell 7.5G 4/2.) |
| Bolt Thread | ISO Metric System |
Cùng Chuyên Mục: